Free template

Baseline, target, payback: with the assumptions left visible

Built so the number survives being challenged. Seven inputs, net benefit for year one and thereafter, payback in months, and a sense-check on whether your target is defensible.

Done: your download is ready.

Download the Template (.xlsx)

Start from a real downtime figure using the cost model.

What's inside

Seven inputs, each annotated
Extra units, contribution and net benefit
Payback in months
A published reference point for judging your target
Assumptions stay on the sheet, not in a footnote

The TEEPTRAK approach

Stop estimating the losses. Measure them on every machine.

The calculators on this site run on your estimates. TEEPTRAK replaces the estimates with measured data: every stop with its duration and reason, every cycle and every scrapped part, machine by machine and shift by shift.

Availability, performance and quality losses recorded automatically, not typed in at the end of the shift
Stop reasons entered by operators at the machine, in their own language
OEE per machine, line and shift, live on the shop floor and in management reports

Used in 700+ factories. At Hutchinson, OEE rose from 47% to 72%. Installed with a module wired into the electrical cabinet and a sensor at the edge of the line. No PLC changes. TEEPTRAK is not an MES: it measures, so you know what to fix first.

See how TEEPTRAK works →What one OEE point is worth in your country →